— 26750 High Capacity
TEN AMP-HOURS IN ONE CAN
10000mAh and 36Wh from a single 26750 cell. For packs where watt-hours per weld point is the metric that matters.

— Where it works
WHAT THIS CELL IS GOOD FOR
Each scene states the case for this cell and, just as plainly, the case against it. Knowing which cell not to buy is the point.
Cutting the cell count
At 36Wh per cell this carries roughly 1.7 times the energy of a 21700. Fewer cells means fewer spot welds, less nickel strip, and a smaller BMS channel count for the same total capacity.
Where it does not fit
The 26750 is a less common format. Before designing one in, confirm holder, spacer, and enclosure availability — the electrical gain is real, the mechanical ecosystem is not as mature as 21700.

High-capacity portable storage
A 2C continuous rating is comfortably above what a portable power station or storage module needs, so the capacity advantage comes without a current penalty at that duty.
Where it does not fit
Do not treat this as a cycling champion. At 300–500 cycles it is not a substitute for a chemistry built for daily deep discharge in a fixed solar bank.

Low-stress, high-energy builds
Where the load is modest and the goal is simply to move the most watt-hours in the fewest cells, this is the densest option available at 305 Wh/kg.
Where it does not fit
Weight is up to 118g per cell — more than double a 21700. On a mobile application the larger can may cost more in total pack mass than the reduced cell count saves.

— The numbers that matter
INR26750-100 · 10000mAh
Capacity
Energy stored per cell. Multiplied across the pack, this is your run time.
Standard discharge
The current this cell can hold continuously. Match it to your load before anything else.
Pulse discharge
A short burst — motor start, takeoff, inrush. Not a sustained figure.
Cycle life
Charge/discharge cycles before capacity falls to the end-of-life threshold, at gentle duty.
Remaining ratings
- Nominal voltage
- 3.6V
- Max charge
- 4.2V
- Charge current
- 10A (1C)
- Energy
- 36Wh
- Energy density
- 305 Wh/kg
- Weight
- ≤118 g
Figures reflect NCM 26750 · High Capacity manufacturer specifications. Duty cycle, thermal management, and pack design all move the real numbers — confirm your intended load with Monachi before committing to a target.
— Compare the family
CLOSE CALLS IN 26750 HIGH CAPACITY
— Order this cell
INR26750-100
10000mAh · NCM 26750 · High Capacity
Add this cell to your cart, or send the selection straight to our sales team on Telegram. Prices shown are indicative starting prices — final B2B pricing, availability, and terms are confirmed by Monachi.
Indicative pricing (USD)
Not a final offer. Freight, duties, and payment terms are quoted per order — confirm with Monachi before you plan against these numbers.
3-month warranty on every cell. Defective cells are replaced.

